9.5 Inch Fuel Level Sender Marine Fuel Water Level Gauge Sensor 240-330 ohm

Description

Store category
Sign Up Now !
You may also like
9.5 Inch Fuel Level Sender Marine Fuel Water Level Gauge Sensor 240-330 ohm
Product Description
Brand
Genuine Marine
Manufacturer Part Number
S3U250
Warranty
1 Year
Product Information:
Name: Oil tank detector
Rod length: 250mm
Installation method: BSP1 1/4" threaded installation
Material: stainless steel 316
Protection level: IP67
Installation apron: 38*26mm 43*3.5mm
Rated power: 125mW
Alarm switch rated current: 500mA
Wire material: PVC
Connector: Amp, Delphi, Tyco, etc. can be selected according to requirements
Output signal: 0-190 ohm, 240-330 ohm, customized according to customer requirements; can provide output bit 0-20mA, 4-20mA current signal or 0.5-4.5VDC, 0-5VDC voltage output signal
Signal spacing: 5mm, 8mm, 10mm, 12mm, 16mm, 21mm
Operating temperature: -40°C to +85°C
Working voltage: 12V/24V universal
Note:
The probe is placed in the fuel tank and does not completely bottom out, but it does not affect the use. Please pay attention to the size.
Product Description:
1. The main material is made of stainless steel 316, anti-rust and anti-corrosion, suitable for RV, truck, truck, yacht, boat, etc.
2. The float sensor is made of high quality engineering plastics. It has strong corrosion resistance and can work normally between -40 °C and +85 °C.
3. The lowest point alarm can be set according to customer requirements.
4. The sensor can do high and low oil level alarm, the function of conduction and disconnection is a switch. When there is no liquid, the switch is closed, the circuit is connected, the alarm or indicator light alarms. When the water level is high, the circuit is turned on, and an alarm or indicator light is alarmed.
Please consult us if you need this feature.
5. The installation accessories are complete, eliminating the need to buy additional accessories, and the goods can be installed immediately.
Installation method:
1. Blue wire is connected to the negative pole of the power supply
2. Red wire is connected to the positive pole of the power supply
3. Black wire connected sensor resistance output line
4. Orange wire connected to red backlight
5. Yellow line connected with yellow backlight
6. If it is 24V, you need to connect a 150 ohm resistor. If it is 12V, this resistor is not required.
Basic working principle:
The change of the liquid level causes the pontoon to slide up and down along the electron tube. At the same time, the magnet of the pontoon drives the reed switch at different positions in the electron tube, so that the internal circuit electronic signal changes in time, and then a change is fed back to the meter through the wire, and finally the instrument pointer Swing position to display the correct level.
The general signal spacing of the oil tank detector rod is 21mm, but the short length, such as the 150 or 200mm length of the probe, the spacing will be more dense, some are 10mm, and some are 12mm, depending on the situation, but Usually 21mm pitch.
Note:
This product is not equipped with flanges. If necessary, you can search for flanges in our shop because we don't know the thickness and material of your equipment.
Payment
Delivery details
Return&Refund
About us
Contact us
Payment
We accept
only
the following form of payment:
PayPal
.
Please note that the Unpaid Item Case feature is
automatically
enforced on the 4th day that payment has not been received. If payment still has not been received after eBay reminder an unpaid item" will be recorded in buyers account.
This is  eBay policy, please understand.
Delivery details
If the location is US, the delivery time usually takes
15-35
business days, the handle time is about
1-2
business days.
Please make sure that your address in eBay matches the address you would like us to ship to.
If you bought our item on holiday, the shipping day may be delayed. But once we come back to office, we will speed up to ship it, thanks for your understanding for this.
If you have not received your item on estimated arrived time or other issues, please feel free to contact us ! We are always on your side and definitely responsible for all issues you meet .
Return&Refund
We accept Email requests for returns within
30
working days of receiving your order. If the item is in your possession more than 30 days, it is considered used and we will not issue you a refund or replacement.
If you are not satisfied when you receive the item, please contact us without hesitation for a replacement or money back. Please chat with us for a return guide before you return it.
Please Do Not click "Return this item" in any situation, because sometimes it will spend more time to resolve the issue.
Please Click "Contact" via Ebay Message (protected by Ebay), that is the fastest way to fix any issues for you.
About us
Genuinemarine is a pro
fessional company that designs, produces and markets top grade automotive accessories. Our company mainly designs and produces all kinds of touring cars, such as switch panels, LED lamps and other electron
ic products.High quality and good service is the secret of Genuinemarine to do better than others.
If you are satisfied with our item, please give us a active comment which is very important for us. We will be very appreciate if you can leave your real feeling here.
We will leave active comment after receiving the payment. If you are not satisfied with the items or our service, please contact us , we will resolve the issue immediately, thank you!
Contact us
Please Message us from 8:30am. to 5:30pm. (GMT+8) of Monday to Friday
(off-duty at weekend
)
.
·
If you have any questions, please message us and give us a chance to assist you. All messages will be answered
within 1 bu
siness day
(except Public holidays in China). If you do not
receive our reply, please kindly re-sent your m
essage and we will reply to you as soon as possible.
We apologize for the late reply during holidays (included Weekends).
Feedback